Shower Upgrade 101 - Best Practices For New Unit Installation

Book Appointment Now

We've unearthed this article involving How to Install a Direct-to-Stud Shower Enclosure directly below on the net and decided it made good sense to discuss it with you on this site.

A successful shower installation requires mindful preparation and also a great deal of work. In many cases, you will need to do three types of tasks: mounting wall surfaces, setting up the plumbing, as well as completing walls.

Preparation

Firstly, you must decide on the sort of shower that you want to set up. It is essential to determine whether the chosen shower can managing particular systems as well as can regulate a secure degree of water with the boiler. Most shower devices nowadays are made to be versatile to different water pressures (such as saved warm water as well as cold mains).
It is additionally crucial to consider the water stress and also the planning of the piping and water drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be connected to the bathroom faucet as per your need, and also the water temperature can be adjusted by means of the faucets. Push-on mixers are cheap as well as extremely easy to mount. Nonetheless, although the hose pipe link is basic, it is easily displaced. Furthermore, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The hose as well as spray of this type of shower are incorporated with a bath mixer faucet, as well as the temperature can be changed via the bath faucets. It is an extremely inexpensive choice and no extra plumbing is entailed. However, the bath/shower mixers likewise deal with troublesome temperature level control choices.

Guidebook Mixer: The hose pipe and also spray of a hands-on mixer shower device are a part of the wall surface unit and also the hot and cold water materials are connected to a single shutoff The temperature and also pressure of the water are managed via either one or a range of knobs (in more costly showers). Although temperature control is much easier in hand-operated mixer types, they are a lot more pricey than the previously pointed out mixers. They additionally require extra plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The pipe and also spray of this shower type are a part of the wall system and also the hot and cold water materials are attached to a single shutoff below too. It is total with an integrated stabiliser to self-adjust the water temperature as well as to prevent it from ending up being also hot. One of the biggest benefits of a thermostatic mixer shower kind includes convenient temperature level control. Nonetheless, it is one of the most expensive of the different mixer choices.

Power Shower: A power shower is a solitary device containing an effective electrical pump that can modifying both the water stress and temperature. This kind of shower can be fitted if there is water system from a cold water tank and also a hot water cylinder. A power shower makes the adjustment of both pressure as well as temperature level very easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a mix central heating boiler under keys stress.

Electric Shower: An electric shower is plumbed into a keys cold water supply and it heats the water electrically. It is essential to note that for this shower type to be set up, the mains pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The system enables the temperature as well as pressure to be adjusted via a knob. Models with temperature stabilisers are better as they remain untouched by various other faucets in other places in operation within the home. A major drawback of electric showers is that the control knob just permits the alternative of heats at much less stress, or lower temperatures at a greater pressure. This is problematic in the winter when the spray is commonly weak as well as the mains water is colder. However, this problem is taken on in some versions which are readily available with a winter/summer setup.

Technique

Depending on the kind of shower you want to set up, the shower head should either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it must have a check shutoff.
Prior to starting, it is recommended to note the positions of the shower head and control, and also to prepare the pipe-work included. Additionally, the drainage system to get rid of the drainage will require to be intended. Both settings of the cable path and the shower button will certainly likewise need to be taken into consideration if an immediate or electrical shower unit is being set up.
Use the guideline overview offered with the shower device to fit the shower control.Before suitable the pipes that will provide the water to the shower system, it is very important to cut off the water. In order to secure the pipes, they need to be given a water-proof covering and additionally fitted with isolating shutoffs. The pipes can then be hidden into the wall surface as well as plastered over to neaten the total appearance.
Fit the base tray, shower head, and installations.
Link the major shower control to the pipes that will certainly be supplying the water (This might need a women screw string adapter).
Reconnect the water supply and examination the pipes for any kind of leaks, as some might need firm.
If you are installing an electric shower, remember to turn off the electrical power supply prior to making any type of electric connections. As soon as these connections have actually been made (there should be support within the instruction manual), the power supply can be switched over back on.

Changing Water Stress to Match Your Shower

The cold water tank can be raised to a higher elevation (in some cases as low as 150mm (6inches)) by fitting a strong wood assistance below it - perhaps composed of struts as well as blockboards. If you pick this option, the major and distribution pipelines will likewise need to be raised to satisfy the new elevation of the reservoir.
Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be attached into the power supply in order to operate.

Piping as well as Water drainage

It is best to make use of 15mm diameter supply pipes, as well as make the go to the shower as short and straight as feasible so regarding keep maximum pressure and also reduce heat loss. Furthermore, by minimising using arm joints for pipeline corners, you can decrease the resistance in the flow of the water. You can attain this by bending the pipes instead.

A Lot Of Usual Errors

Breaching or overlooking neighborhood code restrictions.

Using pipes that are as well little.

Affixing copper to galvanized without making use of a brass or dielectric suitable between the two.

Not using tape or pipe substance at threaded joints.

Uneven your components when installing them.

Not installing an air gap filling up for fixtures.

Cutting supply stub outs as well brief to mount the shutoff valves onto after the finished wall is in place.

Not properly aligning tubing into fittings or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will cause a leak.).

When transforming the water back on in your house, always run the outside hose pipe valve or flush your bathrooms to bleed dirt and air from the lines. This particles can trigger issues in your sink faucets as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very fascinated by How to Install a Direct-to-Stud Shower Enclosure and I really hope you appreciated our post. Sharing is nice. Helping others is fun. We value reading our article about Simple ways to Install a Shower Cubicle on Your Own.

Get Offer